Featured Projects    Previous project.     Next project.

Pella Corporate Office Facility

Location: Pella, IA
Job Description: 80,400 SF New Addition

Proctor Mechanical has been using its ProVision™ technique and ExtraNet site on the new Pella Corporate Office facility. The 80,400-square-foot building was designed by the architectural firm of SVPA with Vitus Bering as project architect and Don Snedden as project manager. Proctor's project superintendent is Todd White.

The new addition consists of the main entry court with its eye-catching fountain and suspended pedestrian bridge over a main product display area. The addition houses the auditorium with all of its associated support facilities, as well as a PC lab area, training centers and three levels of open-concept office space.

The mechanical systems that are being installed by Proctor Mechanical were designed by KJWW Engineers with Nathan Apprill as the project engineer. The project consists of a VAV zoned HVAC system, with 360 tons of cooling and hot water heating. The new mechanical room houses the new boilers and chiller, as well as all associated pumping systems.

The exterior of the building has hot water perimeter fin-tube radiation. The systems consist of two 1400 MBH boilers, the 360 ton chiller, and four custom-built air handlers with the capacity for 99,250 CFM of conditioned air through 94 VAV zones.

The plumbing systems consist of 89 plumbing fixtures located in toilet banks on each of the four levels of the facility. The roof drainage system consists of a total of 12 roof drains.